HP StorageWorks Storage Mirroring Scripting Guide (T2558-96327, April 2009)

16 - 16
Limit Bandwidth
Limit Bandwidth Disable
Command LIMIT BANDWIDTH
Description Sets a fixed bandwidth limitation for transmitting data from the source to the
target
Syntax
LIMIT BANDWIDTH <bytes>, <seconds> TO <target>
Options
 bytes—Number of bytes to be transmitted
 seconds—Maximum number of seconds to wait before transmitting again
 target—Name of the target, an IP address on the target, or a virtual IP
address. Depending on the network route Storage Mirroring uses to
access the target, you may need to specify the fully qualified domain
name.
Examples
limit bandwidth 19300, 5 to beta
Notes
 This command transmits in bursts, not bytes per seconds. The time
identifies how long to wait before transmitting again. For example, if 5
seconds are specified and it only takes 2 seconds to send the specified
bytes, Storage Mirroring will wait an additional 3 seconds before
transmitting again.
 Target names that contain non-alphanumeric characters must be
enclosed in quotation marks.
Command LIMIT BANDWIDTH DISABLE
Description Disables a bandwidth schedule without losing the schedule settings
Syntax
LIMIT BANDWIDTH DISABLE ON <target>
Options target—Name of the target, an IP address on the target, or a virtual IP
address. Depending on the network route Storage Mirroring uses to access
the target, you may need to specify the fully qualified domain name.
Examples
limit bandwidth disable on beta
Notes Target names that contain non-alphanumeric characters must be enclosed in
quotation marks.