HP StorageWorks Storage Mirroring for Linux User's Guide (T2558-96317, June 2009)

15 - 6
97 Restore started con_id The restoration process of copying the up-to-date
data from the target back to the original source
machine has started.
98 Restore completed con_id The restoration process of copying the up-to-date
data from the target back to the original source
machine has been completed.
99 RepSet Modified: repset_ name This message means that the specified replication
set has been modified.
100 Failover condition has been met
and user intervention is required
Storage Mirroring has determined that the source
has failed, and requires manual intervention to start
the failover process.
101 Failover in progress!!! The conditions for failover to occur have been met,
and the failover process has started.
102 Target full! The disk to which data is being written on the target
is full. This issue may be resolved by deleting files
on the target machine or by adding another disk.
801 Auto-disconnect has occurred on
IP address address with
connection con_id Disconnected
replication set name:
repset_name.
Auto-disconnect has occurred for the specified
connection. This is due to the source queue filling
up because of a network or target failure or
bottleneck.
10001 Activation key is not valid. An invalid activation code was identified when the
Storage Mirroring daemon was started.
10002 Evaluation period has expired. The evaluation license has expired.
10003 Activation code violation with
machine machine_name
Duplicate single-server activation codes are being
used on the servers, and Storage Mirroring is
disabled.
10004 Valid activation key detected A valid activation code was identified when the
Storage Mirroring daemon was started.
51001 Source module failed to load The Storage Mirroring source module failed to load.
Look at previous log messages to determine the
reason. (Look for messages that indicate that either
the activation code was invalid or the
user-configurable source module was not set to
load automatically at startup.) The source module
may have been configured this way intentionally.
51501 Source module loaded
successfully
The Storage Mirroring source module was loaded
successfully.
51502 Source module already loaded The Storage Mirroring source module was already
loaded.
51503 Source module stopped The Storage Mirroring source module stopped.
52000
 The target has been paused
due to manual intervention.
 The target has been resumed
due to manual intervention.
The target has been paused or resumed through
user intervention.
ID Message Description