HP StorageWorks Optical 30ux Getting Started (AA961-96001, May 2004)

Getting Connected
7.5 cm (3 in)
1
Note the
environmental
considerations. Sufficient clearance
is necessary to ensure adequate air circulation.
hp
StorageWorks
Optical 30ux
Getting
Started
4
2
1
R
e
m
o
v
a
l
3
Accessories:
A. Power cord (U.S.)
B. Terminator
C. UDO media
D. Driver CD
E. Documentation CD
F. Getting Started poster
G. Setup Guide
H. Warranty information
I. Safety Guide
Not Included:
J. LVD SCSI adapter
for host system
K. LVD SCSI cable
L. Non-U.S. power cord
A
B
C
J K L
H
I
E
F
G
D
FRONT VIEW:
A. Disk slot
B. Activity indicator
C. Power indicator
D. Eject tool
access hole
E. Eject button
A
D
C
BACK VIEW:
A. SCSI ID switch
B. Power connector
C. On/Off switch
D. SCSI port with
terminator
E. SCSI port with
SCSI cable
Note: See the HP StorageWorks
Optical 30ux User’s Guide for detailed
information regarding these features.
A
B
C
D
E
B
E
Caution: Components can be
damaged by electrostatic discharge.
Make sure you are properly grounded
when touching static-sensitive
components.
Note: The following is an overview
of the installation procedure.
For detailed information, refer to the
setup guide that shipped with this
product.
© 2004 Hewlett-Packard Development Company, L.P.
First Edition (May 2004)
Part Number: AA961-96001
*AA961-96001*
AA961-96001