HP StorageWorks 1500 Modular Smart Array installation guide (355901 - 005, June 2007)

4
Recommended SCSI cable connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Supported and unsupported SCSI connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Connecting the MSA to SATA storage enclosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Connecting the MSA to SCSI storage enclosures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Connecting the Fibre Channel cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Connecting Fibre Channel cables in a singlepath configuration . . . . . . . . . . . . . . . . . . . . 47
Connecting Fibre Channel cables in a multipath configuration . . . . . . . . . . . . . . . . . . . . . 48
Connecting the power cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Step 10: Power on the devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Verify the operating status of the MSA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
View the LEDs on the MSA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Read the messages on the controller display panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Verify the operating status of the storage enclosures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Verify the operating status of the Fibre Channel switches . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Verify the operating status of the servers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Step 11: Configure your MSA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Obtain desired controller firmware and Support Software CD versions. . . . . . . . . . . . . . . . . . 56
Determine which storage configuration utility to use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
About the MSA Command Line Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
About the Array Configuration Utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
About the Array Configuration Utility Command Line Interface . . . . . . . . . . . . . . . . . . . . . 58
Configure the MSA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
2 Configuration procedures—Windows environments. . . . . . . . . . . . . . . . . . . . . . 61
Prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Installing MSA-specific components on the servers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Updating MSA controller firmware (if necessary) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Configuring the storage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
3 Configuration procedures—Linux environments . . . . . . . . . . . . . . . . . . . . . . . . . 67
Prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Installing MSA-specific components on the servers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Updating MSA controller firmware (if necessary) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Configuring the storage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
4 Configuration procedures—HP-UX environments . . . . . . . . . . . . . . . . . . . . . . . . 73
Prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Additional HP-UX support notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Installing the ACU-CLI on the servers (optional). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Updating MSA controller firmware (if necessary) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Configuring the storage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
5 Configuration procedures—OpenVMS environments . . . . . . . . . . . . . . . . . . . . . 79
Prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Obtaining World Wide Port Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Installing the current Fibre_SCSI patch on the servers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Updating MSA controller firmware (if necessary) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Configuring the storage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82