HP StorageWorks 1500 Modular Smart Array installation guide (355901 - 005, June 2007)

Configuration procedures—OpenVMS environments80
Obtaining World Wide Port Names
When setting connections to the MSA, you must supply the WWPNs of the Fibre Channel adapters
on the OpenVMS system.
To obtain the WWPNs:
1. From OpenVMS, use the following DCL command:
$ show device fg/full
The following information is displayed:
Device FGA0: device type KGPSA Fibre Channel, is online, shareable, error
logging is enabled.
Error count0Operations completed0
Owner Process““Owner UIC[SYSTEM]
Owner process ID00000000Dev ProtS:RWPL,O:RWPL,G,W
Reference count0Default buffer size0
Current preferred CPU Id0Fastpath1
FC Port Name1000-0000-C922-4659FC Node Name2000-0000-C922-4659
Device FGB0: device type KGPSA Fibre Channel, is online, shareable, error
logging is enabled.
Error count0Operations completed0
Owner Process““Owner UIC[SYSTEM]
Owner process ID00000000Dev ProtS:RWPL,O:RWPL,G,W
Reference count0Default buffer size0
Current preferred CPU Id0Fastpath1
FC Port Name1000-0000-C921-5B6EFC Node Name 2000-0000-C921-5B6E
2. Record the WWPNs (FC Port Name in the previous example).
WWPN: _________________________
WWPN _________________________