HP StorageWorks Fabric OS 6.0.0b release notes (5697-7345, April 2008)

Closed defect summary
Solution
Running in a fabric with a non B-Series switch that does not support
the ESS command
, the B-Series switch eventually runs out of memory.
Fixed in Fabric
OS 6.0.0
Configdefault does not completely remove all the FCIP tunnels
and GigE IP address information.
Fixed in Fabric OS 6.0.0
4/256 SAN Director with Fabric OS 5.2.0a -- switch keeps rebooting
itself.
Fixed in Fabric OS 6.0.0
iswitchd panic when d oing data migration using DMM. Fixed in Fabric OS 6.0.0
SANtester trafficdoesnotflow from EOS8 native edge with redundant
links to Fabric OS edge: 4 devices per edge.
Fixed in Fabric OS 6.0.0
Weblinker died and was restarted due to memory leak. Fixed in Fabric OS 6.0.0
Stressful sl
ot commands testing on a 4/256 SAN Director (large
fabric): iswitchd hit an ASSERT a nd CP rebooted.
Fixed in Fabric OS 6.0.0
Autonegotiation does not bring the ports to the correct maximum
speed.
Fixed in Fabric OS 6.0.0
I/O Ops failure due to incorrect CUP Port PDCM bit for port 256
after firmwareupgrade from Fabric OS 5.1.x to later releases.
Fixed in Fabric OS 6.0.0
4/32 B SAN Sw
itch switch CUP Port responds Busy to first command
issued and
remains busy forever to Host.
Fixed in Fabric OS 6.0.0
During large fabric testing with several devices, and under some rare
conditions, while performing HotCodeLoad from Fabric OS 5.2 .1b
to 5.3 on 4/256 SAN Director a few frames wer e dropped.
Fixed in Fabric OS 6.0.0
Web Tools Access Gateway: cannot create user accounts due to
error -- AD permission conflict.
Fixed in Fabric OS 6.0.0
FR4- 18 i g o t fau l t y 21 d u e t o chi p ini t tim e out, a f ter slotpoweron
and hafailover.
Fixed in Fabric OS 6.0.0
Switch sometimes sends 4-byte payload RSCN frame (minimum
should be 8 bytes).
Fixed in Fabric OS 6.0.0
When 240 VIs and 2 VTs are created, not all of them show up in
thenameserver.
Fixed in Fabric OS 6.0.0
Fabric Watch daemon panics while pulling data from temperature
sensors.
Fixed in Fabric OS 6.0.0
4/256 SAN Director asserts after hafailover, switchdisable.
Fixed in Fabric OS 6.0.0
On a specific th ird-par ty mainframe, system Poweron/Reset Chpids
results in the FR4-18i failing to come online.
Fixed in Fabric OS 6.0.0
4/64 SAN Switch constantly rebooting in third-party lab.
Fixed in Fabric OS 6.0.0
GID_Ft commandrejectedfromtheHBAwithamessage:
FC4-type not registered.
Fixed in Fabric OS 6.0.0
Many SFP current and voltage error messages logged on a 4/256
SAN Director .
Fixed in Fabric OS 6.0.0
Some backplane ports of a Brocade 4Gb SAN Switch for HP c-Class
BladeSystem blade do not work well in a third-party chassis.
Fixed in Fabric OS 6.0.0
FCIP configuration functionality should be restored in Fabric OS 5.3.x
We b Tools.
Fixed in Fabric OS 6.0.0
FICON/CUP hangs in the middle of a Channel Command Word
(CCW) chain.
Fixed in Fabric OS 6.0.0
GA_N
XT returns VI PID and PWWN in FR mode.
Fixe
d in Fabric OS 6.0.0
16