7100ux Optical Jukebox Service Manual (AA969-90904, September 2004)

FRU Removal and Replacement

124 1000ux/1900ux/2300ux and 3800ux/7100ux Optical Jukebox Service Manual

Reassembly Notes

When remounting the rear rope tensioner on the drive rope, position the tensioner so that the

spring is on the right side. The position of the tensioner is shown in the enlarged tensioner in

Figure 78.

It is recommended that you mount and secure the tensioners on the translate frame in the order

shown on Figure 78.

Figure 78: Positioning the Tensioner to Mount on the Translate Frame

To give yourself enough rope slack, fasten the drive rope ends to the rope tensioner before

hanging the drive rope over the top two pulleys (see #2 Figure 78).

Before applying tension by setting the rope tensioners, insert the ropes into the rope coupler

and attach the coupler cover plate (see Figure 78).

Reinstall the translate frame on the ropes as described in the reassembly notes in the procedure

for “Removing/Replacing the Translate Frame (Including the Picker)” on page 111.