2300ux Optical Jukebox Conversion Guide (AA994-96001, May 2004)

Converting an MO Jukebox to UDO or Mixed-Media Technology

251000ux/1900ux/2300ux Optical Jukebox Conversion Guide

5. Remove the 8 T-20 screws that secure the interposer board to the jukebox (see Figure 10).

Figure 10: Existing interposer board

6. Remove the interposer board from the jukebox.

7. Remove any remaining ferrites and clips from the GPIO and SCSI cables. These include

any on the outside of the jukebox frame.

8. Remove from the jukebox and discard the GPIO and SCSI cables.

1 Interposer board (existing)

2 Screws

3 Configuration module location

