2300ux Optical Jukebox Conversion Guide (AA994-96001, May 2004)

Converting an MO Jukebox to UDO or Mixed-Media Technology

311000ux/1900ux/2300ux Optical Jukebox Conversion Guide

Figure 16: Finish routing the cables

3. The appropriate folds are already in the cables. Ensure that the folds in all three cables are

lined up even with each other. This will give you the proper length of each cable to connect

to the new interposer board.

4. Using three plastic cable clamps, provided, secure the cables to the left side of the jukebox

frame, as shown in Figure 16.

Note: Securing the cables as shown in Figure 16 ensures that regulatory certifications are

maintained.

1 Upper (vertical) slot for ribbon cables

2 Lower (horizontal) slot for ribbon cables

3 Plastic cable clamps

4 Ribbon cables

5 Ribbon cable fold (align all three here)