HP StorageWorks 30ux Standalone UDO Drive User's Guide (AA961-90901, May 2004)

Operations

13HP StorageWorks 30ux Standalone UDO Drive User’s Guide

Figure 2: Back panel features

Back panel features descriptions

■ SCSI ID switch—Used to set the SCSI ID.

Note: Be careful not to inadvertently change the SCSI ID when handling the standalone

UDO drive.

■ Power connector—Connection for the power cord.

■ Power switch—Turns power to the standalone UDO drive on and off.

■ SCSI port with terminator —68-pin high-density SCSI connector (Micro

D-type). Cable may be attached to either connector.

■ SCSI port with SCSI cable—68-pin high-density SCSI connector (Micro

D-type). Terminator may be attached to either connector.

1 SCSI ID switch

2 Power connector

3 Power switch

4 SCSI port with terminator

5 SCSI port with SCSI cable