HP StorageWorks 30ux Standalone UDO Drive User's Guide (AA961-90901, May 2004)

Operations
18 HP StorageWorks 30ux Standalone UDO Drive User’s Guide
Ejecting a disk from the drive
There are two methods for ejecting disks from the drive.
Using the disk eject button
From the drive’s front panel, push the eject button located below the disk slot (see
Figure 6).
Figure 6: Using the disk eject button
Manually ejecting disks with power off
Note: The procedure for manually ejecting disks should rarely be needed. Before
resorting to the manual method, always attempt to eject disks using the disk eject button
(see Figure 6).
The drive does not automatically eject a disk cartridge if a power failure occurs.
To manually remove a disk from the drive:
1. Disconnect all power to the drive.
2. Insert a small, flat-slotted screwdriver into the access hole located below the
disk slot on the front panel of the drive (see Figure 7). The screwdriver will
engage a screw behind the access hole.
Disk eject button