Brocade Web Tools Administrator's Guide (53-1000606-01, October 2007)

Web Tools Administrator’s Guide 47
53-1000606-01
Monitoring events
3
The Event Filter dialog box appears.
FIGURE 26 Event Filter dialog box
3. To filter events within a certain time period:
a. Select the From check box and enter the start time and date in the fields.
b. Select the To check box and enter the finish time and date in the fields.
4. To filter events beginning at a certain date and time, select the From check box and enter the
start time and date.
5. To filter events up until a certain date and time, select the To check box and enter the finish
time and date.
6. Click OK.
The filter is enabled and the window is refreshed to show the filtered information.
Filtering events by event severity levels
1. Open the Fabric Events window or the Switch Events tab as described in “Displaying Fabric
Events” on page 44 or “Displaying Switch Events” on page 45.
2. Click Filter.
The Event Filter dialog box appears.
3. Check Level.
4. Check the event levels you want to display.
5. Click OK.
The filter is enabled and the window is refreshed to show the filtered information.