Brocade Web Tools Administrator's Guide (53-1000606-01, October 2007)

56 Web Tools Administrator’s Guide
53-1000606-01
Performing a firmware download
4
Performing a firmware download
During a firmware download, the switch reboots and the browser temporarily loses connection with
the switch. When the connection is restored, the version of the software running in the browser is
different from the new software version that has been installed and activated on the switch. You
will need to close all of the Web Tools windows and log in again to avoid a firmware version
mismatch. Note that for chassis-based switches, you might get popup messages that imply the loss
of connection is temporary and will soon be resolved. You still need to close all windows and re-log
in.
When you request a firmware download, the system first checks the file size that is to be
downloaded. If the compact flash does not have enough space, Web Tools displays a message and
the download does not occur. If this happens, contact your switch support supplier.
NOTE
You can perform a firmware download only when the current Admin Domain owns the switch.
1. Open the Switch Administration window as described on page 29.
2. Click the Firmware Download tab.
FIGURE 30 Firmware Download tab
3. Choose whether you are downloading the firmware or the firmware key.
4. Choose whether the download source is located on the network or a USB device.