HP StorageWorks Fabric OS 5.0.5f Release Notes (AA-RW1WH-TE, December 2007)

individually was added. That means that individual traps need to be turned on explicitly after the
corresponding trap group is turned on.
After the upgrade from Fabric OS 4.2.0 firmware, individual traps are turned off by default even if the
corresponding trap group was turned on before the upgrade. Therefore, if you have been previously
monitoring these traps, you need to use either snmpMibCapSet or the n ewer snmpconfig command to
turn the desired traps on individually.
The default setting is for all traps is Disabled.
Zoning
With A UDIT log
ging enabled, while performing zoning changes through the CLI, an additional audit
log from HTTP
may also appear along with the audit logs from zoning. This message does not always
appear, and when it does, it represents redundant reporting by the CAL layer.
Fabric Manager firmware download
For an embedded switch running Fabric OS 5.0.2 and 5.0.3 using the s mall firmw are file format, Fabric
Manager (FM) version 5.0 supports firmware download using the external ftp server to download the
firmware to the switch. In Fabric Manager’s O ptions dialog, set the FTP server setting to the external
option. In the Firmware Download dialog, select the external ftp ser ver to download. Fabric Manager
does not support importing the image into the Fabric Manager firmware repository.
FICON/CUP support
HP does no
t support IBM Fibre Connections (FICON) in this Fabric OS 5.0.5f firmware release. See
h
ttp://www.hp.com for a list of currently supported features.
NPIV update
HP does not currently support N-Port ID Virtualization (NPIV) in this Fabric OS 5.0.5f firmw are release.
See h
ttp://www.hp.com for a list of currently supported features.
Unsupported commands
The slotOff and slotOn commands are now obsolete; use slotPowerOff and slotPowerOn
instead. The portLogPortShow command is also now obsolete.
RSCN suppression
This release of Fabric OS features RSCN suppression: the ability to control RSCNs originating from
hosts on a port-by-port basis.
Enhanced RAS log messages
Fabric OS 5.0.1 introduced Zoning Audit messages. These m essages record information about the type
of zoning change made (including such tasks as cfgenable and cfgdisable) and the role level and
user n
ame m aking the changes. The messages are recorded in the RASlog whether change was made
through the CLI or Web Tools. Note that occasional redundant entries are possible due to an extra HTTP
entry when zoning changes are performed through the CLI.
Fabric scalability
Fabric OS 5.0.5f supports the same fabric scalability as Fabric OS 4.4.0: 2,650 ports with 50 domains.
6