HP StorageWorks Fabric OS 6.0.1a release notes (AA-RWFMA-TE, June 2008)

Fabric OS 6.0.0a
fixes
Table 6 lists defects closed in the Fabric OS 6.0.0a firmware release.
Table 6 Fabric OS 6.0.0a c losed defec ts
Closed defect su
mmary Solution
In some cases, frame loss is observed during normal FICON I/O.
Fixed in Fabric OS 6.0.0a
Top Talkers counters are inaccurate when enabled on more than one
Fx_port at a time.
Workaround: Enable the Top Talkers
feature only on individual Fx_por ts.
AFICONemulat
ion error is generated when running FICON
emulation tape pipelining to STK/SUN tape drives when read
emulation is enabled.
Workaround:TocleartheXRCCU
busy error, disable and re-enable the
tunnel.
The DC Director may ASSERT in a specific test scenario while running
a particular F ICON test program (SAK IRNDUP).
Fixed in Fabric OS 6.0.0a
In interop mode, an F_Port connected into a shared area of a 48-port
blade in a DC Director will not show up in the distributed name server.
Workaround:Movedevicesoutof
the s hared area into a non-shared
area.
2Gb Channels fail to come online from T-Rexx to a 128-port 4/256
SAN Director .
Fixed in Fabric OS 6.0.0a
In some cases where an FCIP address is on a different subnet, a MAC
level broadcast is sent instead of the router’s MAC.
Fixed in Fabric OS 6.0.0a
Federal I nformation Processing Standard (FIPS) related changes
required in response to the FIPS audit.
Fixed in Fabric OS 6.0.0a
Not able to add 96-bit license after upgrading from Fabric OS 5.3.x
to 6.0.
Fixed in Fabric OS 6.0.0a
HP StorageWorks Fabric OS 6.0.1a release notes
21