HP StorageWorks Fabric OS 6.0.1a release notes (AA-RWFMA-TE, June 2008)

4/256 SAN Direct
or blade support
Fabric OS 6.0.1a is fully qualified and supports the Director blades listed in Table 2.
Table 2 4/256 SA
N Director blade suppor t m a trix with chas sis option 5
Director blade
Number of blad es
FC4-16
FC4-32
FC4-48
FC8-16
FC10-6
FC4-16, FC4-32 and FC4-48 require Fabric OS 5.3
or later with any mix (up to eight of each). No
restrictions around intermix.
FC8-16 and FC10-6 require Fabric OS 6.0.0b
minimum.
FC4-16IP
Up to a maximum of four Director blades (must be
FC4-16IP or FR 4-18i only)
FR4-18i
Up to a maximum of two Director blades (FR4-18i
only)
Note: The FR4-18i installed in the DC Director
requires Fabric OS 6.0.0b or later.
DC Director blade support
Fabric OS 6.0.1a is fully qualified and supports the blades for the DC Director blades listed in Table 3.
Table 3 DC Director blade support matrix
Director blade
Number of blad es
FC8-16
FC8-32
FC8-48
FC10-6
Supported with Fabric OS 6.0.0b and later with any
mix (up to eight of each). No restrictions around
intermix.
FC4-16IP
Supported with Fabric OS 6.0.0b and later , up to a
maximum of eight FC4-16IP Director blades.
FR4-18i
Supported with Fabric OS 6.0.0b and later , up to a
maximumoffourbladesofthistype.
NOTE:
The iSCSI FC4-16IP blade is not qualified for the DC Director in Fabric OS 6.0.1a.
Fibre Channel Routing (FCR) scalability
See the HP StorageWorks SAN Design reference guide for the latest scalability support information:
h
ttp://www.hp.com/go/sandesignguide
HP StorageWorks Fabric OS 6.0.1a release notes
9