7100ux Optical Jukebox Service Manual (AA969-90904, September 2004)

FRU Removal and Replacement

100 1000ux/1900ux/2300ux and 3800ux/7100ux Optical Jukebox Service Manual

Replacing the Mailslot Assembly

1. Remove the three right-side panels and the upper and lower RFI panels (see “Access for

3800ux/7100ux Models” on page 46).

2. Ensure that the mailslot sensor cable is disconnected from the upper interposer PCA (see

Figure 55).

3. Remove the two T-20 mailslot mounting screws from the bottom of the mailslot (#2 on

Figure 55).

4. Slide the mailslot out of the jukebox (see #3 on Figure 55).

Figure 55: Removing the Mailslot Assembly