7100ux Optical Jukebox Service Manual (AA969-90904, September 2004)

FRU Removal and Replacement

120 1000ux/1900ux/2300ux and 3800ux/7100ux Optical Jukebox Service Manual

Replacing the Vertical Motion Motor

1. Remove the lower left-side access panel (see “Access for 3800ux/7100ux Models” on

page 46).

Extra panels are removed in Figure 74 for parts visibility in this description.

2. Disconnect the red and black power cables to the vertical motor (see Figure 74).

Note: Note the orientation of the motor before removing it in the next step. The motor must be

replaced in the same position on reassembly.

3. Remove two T-15 motor mounting screws on the gear box. Remove the motor (see the

arrows on Figure 74).

Figure 74: Cables and Mounting Screws on the Vertical Motion Motor

Reassembly Notes

When replacing the motor, use the orienting pegs on the motor to place the motor correctly on

the gear box.