7100ux Optical Jukebox Service Manual (AA969-90904, September 2004)

FRU Removal and Replacement

1211000ux/1900ux/2300ux and 3800ux/7100ux Optical Jukebox Service Manual

Replacing the Vertical Motor Gear Box

1. Remove the three left-side access panels (see “Access for 3800ux/7100ux Models” on

page 46).

2. Follow the steps in “Removing/Replacing the Translate Frame (Including the Picker)” to

remove the picker and translate frame.

3. Pull the rear tensioner upwards to raise all three tensioners up to a convenient working

height (see #1 on Figure 75).

Figure 75: Opening the Tensioners to Relieve Cable Tension

4. Release the tension on the rear rope tensioner (drive rope) using the following steps (see

Figure 75):

a. Pull back the metal section (#1) to release tension on the metal securing tab seated in

the plastic section.

b. Swing the metal section out and off the pivoting pegs on the plastic section.

5. Remove the drive rope from the rear tensioner.

a. Unfasten the spring.