7100ux Optical Jukebox Service Manual (AA969-90904, September 2004)

FRU Removal and Replacement

1271000ux/1900ux/2300ux and 3800ux/7100ux Optical Jukebox Service Manual

Replacing a Buffer Assembly

1. Remove the lower right-side access panel (see “Access for 3800ux/7100ux Models” on

page 46).

2. Remove the four T-20 screws that mount the assembly enclosure. Remove the enclosure.

Figure 81: Unmounting the assembly enclosure

3. Remove all cables (power and SCSI) from the buffer assembly.

4. Remove the four T-15 screws that mount the buffer board to the inside of the module.

Note: Depending on the model, one or two buffer boards may be mounted in the module.