7100ux Optical Jukebox Service Manual (AA969-90904, September 2004)

Troubleshooting and Diagnostics

311000ux/1900ux/2300ux and 3800ux/7100ux Optical Jukebox Service Manual

Micro-move error codes

Table 6: Micro-move error codes

Micro-Move Error

Code (hex)

Description

01 Vertical over voltage exceeded limit set by firmware

02 Vertical over force exceeded limit set by firmware

03 Vertical servo error

04 Vertical time-out

05 Vertical open path

06 Vertical closed path

0A Plunge over voltage exceeded limit set by firmware

0B Plunge over force exceeded limit set by firmware

0C Plunge servo error

0D Plunge servo error

0E Plunge open path

0F Plunge closed path

10 Top picker expected to be active picker in plunge (run-time)

11 Bottom picker expected to be active picker in plunge (run-time)

12 Bottom thumb expected to be active in plunge home (powerup)

13 Top thumb expected to be active in plunge home (powerup)

14 Translate over voltage exceeded limits set by firmware

15 Translate over force exceeded limits set by firmware

16 Translate servo error

1E No load complete

1F Unexpected load complete

20 Unexpected cartridge in drive

21 No cartridge in drive

22 Drive put in accept failed

23 Drive get out accept failed

24 Drive eject failed

25 Drive insert failed

26 Drive eject retry

27 Drive insert retry

28 Clear drive path

29 Drive signal (not used)

2A Drive not connected

32 Magazine put in saturate failed

33 Magazine get out saturate failed

34 Magazine put in accept failed

35 Magazine get out accept failed