7100ux Optical Jukebox Service Manual (AA969-90904, September 2004)

FRU Removal and Replacement

831000ux/1900ux/2300ux and 3800ux/7100ux Optical Jukebox Service Manual

Removing/Replacing the Vertical Encoder Strip

1. Remove the right access panel (refer to “Access for 1000ux/1900ux/2300ux Models” on

page 45).

WARNING: The edges of the vertical encoder are sharp. Be careful.

Caution: Handle the encoder strip with care and ONLY BY THE SOLID SIDE. The CLEAR

side is made up of very fine slits and CAN BE EASILY DAMAGED.

2. Release the lower end of the vertical encoder strip (see #1 on Figure 37).

3. Unhook the top of the encoder strip from the spring and remove (Figure 37).

Figure 37: Releasing the Ends of the Vertical Encoder Strip