7100ux Optical Jukebox Service Manual (AA969-90904, September 2004)

FRU Removal and Replacement

911000ux/1900ux/2300ux and 3800ux/7100ux Optical Jukebox Service Manual

Replacing the SCSI Cable

1. Remove the right and rear access panels (refer to “Access for 1000ux/1900ux/2300ux

Models” on page 45).

2. Remove the SCSI cable from the interface PCA.

Do step 2 and step 3 of “Replacing the Buffer Assembly” on page 90. Remove only the

SCSI cable on the bottom of the interface PCA.

3. Remove the SCSI cable from the controller PCA.

Do step 2 through step 4 of “Replacing the Controller PCA” on page 88 to remove the

controller PCA. Remove the SCSI cable from underneath the controller PCA.