Brocade Fabric OS Command Reference Manual Supporting Fabric OS v7.0.0 (April 2011)

1008 Fabric OS Command Reference

53-1001764-01

tempShow

Displays temperature readings.

SYNOPSIS tempshow

DESCRIPTION Use this command to display the current temperature readings of all temperature sensors in a switch. For

each sensor, this command displays the sensor ID (an index number), the slot number (if applicable), the

sensor state (OK or absent), and the temperature. The temperature readings are given in both

Centigrade and Fahrenheit.

NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in

place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for

details.

Refer to the hardware reference manual for your switch to determine the normal temperature range.

OPERANDS None

EXAMPLES To display temperature and status sensors:

switch:user> tempshow

Sensor Slot State Centigrade Fahrenheit

========================================================

1 1 Ok 38 100

2 1 Ok 28 82

3 1 Ok 40 104

4 1 Ok 31 87

5 1 Ok 43 109

6 2 Ok 39 102

7 2 Ok 28 82

8 2 Ok 40 104

9 2 Ok 30 86

10 2 Ok 43 109

SEE ALSO fanShow, psShow, sensorShow, slotShow