Brocade Fabric OS Command Reference Manual Supporting Fabric OS v7.0.0 (April 2011)

230 Fabric OS Command Reference

53-1001764-01

dnsConfig

Sets, displays, or removes domain name service (DNS) parameters.

SYNOPSIS dnsconfig

DESCRIPTION Use this command to display, set, or remove the domain name service parameters.

The domain name service parameters are the domain name and the name server IP address for primary

and secondary name servers. The dnsconfig command displays IPv4 and IPv6 addresses.

NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in

place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for

details.

OPERANDS None

EXAMPLES To set the DNS parameters for the system:

switch:admin> dnsconfig

Enter option

1 Display Domain Name Service (DNS) configuration

2 Set DNS configuration

3 Remove DNS configuration

4 Quit

Select an item: (1..4) [4] 2

Enter Domain Name: [] domain.com

Enter Name Server IP address in dot notation: [] \

123.123.123.123

Enter Name Server IP address in dot notation: [] \

123.123.123.124

DNS parameters saved successfully

Enter option

1 Display Domain Name Service (DNS) configuration

2 Set DNS configuration

3 Remove DNS configuration

4 Quit

Select an item: (1..4) [4] 4

SEE ALSO configDownload, configUpload, firmwareDownload, ipAddrSet, ipAddrShow