Brocade Fabric OS Command Reference Manual Supporting Fabric OS v7.0.0 (April 2011)

Fabric OS Command Reference 647
53-1001764-01
portCfgEXPort
22
1
McDATA Open Fabric mode.
2
McDATA Fabric mode.
3
MCDATA fabric legacy mode.
-i mode
Enables or disables Insistent Domain Id (IDID) for the specified EX_Port. Specify
1 to enable IDID, specify 2 to disable IDID. This command must be issued from a
McDATA edge switch attached to a single or dual FCR configuration.
EXAMPLES To set the fabric ID of port 2/1 to 5 and the port ID format to core:
switch:admin> portcfgexport 2/1 -f 5 -p 1
To configure port 2/0 to be an EX_Port and set the fabric ID to 4:
switch:admin> portcfgexport 2/0 -a 1 -f 4
To disable fabric parameter negotiation on port 2/0 of an EX_Port:
switch:admin> portcfgexport 2/0 -t 2
To enable IDID on port 2:
switch:admin> portcfgexport 2 -i 1
To display EX_Port settings configured for Mi10K connectivity:
switch:admin> portcfgexport 10
Port 10 info
Admin: enabled
State: OK
Pid format: Not Applicable
Operate mode: Open
Edge Fabric ID: 70
Preferred Domain ID: 239 mode
Front WWN: 50:00:51:e3:76:0e:4e:46
Fabric Parameters: Auto Negotiate
R_A_TOV: Not Applicable
E_D_TOV: Not Applicable
Authentication Type: None
DH Group: N/A
Hash Algorithm: N/A
Edge fabric's primary wwn: N/A
Edge fabric's version stamp: N/A
SEE ALSO portCfgVEXPort, portDisable, portEnable, portShow, portCfgDefault, fcrBcastConfig