Brocade Fabric OS Command Reference Manual Supporting Fabric OS v7.0.0 (April 2011)

Fabric OS Command Reference 693
53-1001764-01
portCfgShow
22
Interface IPv6 Address Len MTU
--------------------------------------------------------
0 20::2:10 64 1500
Inband management configuration:
Arp configuration:
IP Address Mac Address
------------------------------
Iproute Configuration:
IP Address Mask Gateway Metric
------------------------------------------------------
192.168.42.0 255.255.255.0 192.168.2.250 0
IPv6ddress Len Gateway Metric
-------------------------------------------------------
20:42:: 64 20::2:250 0
Inband Management route configuration:
Fciptunnel configuration:
Vlantag configuration:
-------------------------
Interface Address VlanId L2CoS
Destination Address
------------------------------------------------------
192.168.2.10 200 5
0.0.0.0
192.168.2.10 300 5
192.168.2.21
To display the VLAN tagging configuration only:
switch:admin> portcfgshow vlantag ge2
Port: ge2
Vlantag configuration:
-------------------------
Interface Address VlanId L2CoS
Destination Address
---------------------------------------------------
192.168.2.20 200 5
0.0.0.0
192.168.2.21 300 5
192.168.2.10
To display an FCIP Tunnel on a Brocade FX8-24 with and without IPSec information (In the following
examples, IPSec is in legacy mode):
switch:admin> portcfgshow fciptunnel 1/12 -ipsec
-------------------------------------------
Tunnel ID: 1/12
Tunnel Description:
Compression: Off
Fastwrite: Off
Tape Acceleration: Off