Brocade Fabric OS Command Reference Manual Supporting Fabric OS v7.0.0 (April 2011)

764 Fabric OS Command Reference
53-1001764-01
portShow
22
portShow
Displays status and configuration parameters for ports and GbE ports.
SYNOPSIS portshow [slot/][ge]port
portshow -i [ index1 [-index2] [...]] [-f]
portshow option [slot/]ge_port [optional_args]
portshow option [all | ve_port] arguments
[optional_arguments]
portshow option [all |ge_port] arguments
[optional_arguments]
DESCRIPTION Use this command to display general port status and specific configuration parameters for a specified
port, GbE port, or VE_Port.
If this command is executed for a specified port with no additional options, it displays general status and
configuration for that port. If executed with optional arguments for a Gigabit Ethernet (GbE) port or
VE_Port, the command displays FCIP-related port configuration parameters specific to the Brocade
7800/FX8-24 and the Brocade FR-18i platforms.
The behavior of this command is platform-specific in command syntax and behavior, and you must use
this command in a manner that honors these differences Some command options are not available on all
platforms. Others behave differently depending on the platform on which they are executed.
Platform-specific commands are documented in separate sections that include function, synopsis,
description, operands, and examples. Use the following section headings to navigate this page.
• General port status display commands supported on all platforms
• Port display commands supported only on the Brocade 7800/FX8-24 and on the Brocade FR4-18i
platforms
- portshow ipif - Displays the local IP interfaces.
- portshow arp - Displays the content of the address resolution protocol (ARP) table.
- portshow iproute - Displays static routes on the IP interface.
- portshow vlantag - Displays the IP interface VLAN configuration.
• Commands supported only on the Brocade 7800 and the Brocade FX8-24
- portshow fciptunnel - Displays Fibre Channel over IP (FCIP) tunnels.
- portshow fcipcircuit - Displays FCIP circuits.
- portshow mgmtif - Displays the inband management interfaces.
- portshow mgmtroute- Displays the routes for the inband management interfaces.
- portShow xtun - Displays FICON and FCP emulation statistics and current runtime conditions.
• Commands supported only on the Brocade FR4-18i
- portshow fciptunnel - Displays Fibre Channel over IP (FCIP) tunnels.
- portshow mode - Displays GbE port mode.
- portcfg ficon - Displays FICON emulation parameters.
To display command usage on the switch, use portShow [action].