Brocade Network Advisor SMI Agent Developer's Guide v11.1.0 (53-1002169-01, May 2011)
Brocade Network Advisor SMI Agent Developer’s Guide 99
53-1002169-01
Brocade Access Gateway and NPIV
3
• Brocade_AccessGateway
• Brocade_AGFCPort
• Brocade_AGNode
• Brocade_AGSANProtocolEndPoint
• Brocade_AGMgmtAccessPoint
• Brocade_AGSoftwareIdentity
• Brocade_AGWebGUIRemoteAccessPoint
• Brocade_AGInFabric
• Brocade_AGNodeInAG
• Brocade_AGFCPortInAGNode
• Brocade_AGFCPortInTrunk
• Brocade_PortInAG
• Brocade_AGFCPortSANProtocolEndPoint
• Brocade_AGHostedSANAccessPoint
• Brocade_AGSANActiveConnection
• Brocade_AGHostedRemoteAccessPoint
• Brocade_AGHostedMgmtAccessPoint
• Brocade_AGSANProtocolEndPointLogicalIdentity
• Brocade_NodeFCPortDependency
• Brocade_EthernetAccessGateway
• Brocade_EthernetPortInEthernetAccessGateway
• Brocade_EthernetAGInEthernetAdminDomain
• Brocade_EthernetAccessGatewayHostedLANEndPoint
Limitations
The following are the limitations of Brocade Network Advisor SMI Agent:
• AG on Ethernet switch
- No Brocade_AGFCPort instances are discovered for the Virtual FCoE ports on the Ethernet
AG.
- Brocade_AGSANActiveConnection, Brocade_TopologyView discovery (and related
associations), Brocade_AGSANProtocolEndPointLogicalIdentity,
Brocade_SANActiveConnection, and Brocade_NodeFCPortDependency will not be
complete for the devices attached to the Ethernet AG.
• AG on Brocade Encryption Switch, where the Brocade Encryption Switch AG is the Seed switch.
• The loop devices are not supported when attached to AG.
• The value of LLDP-DCBX for AG port if AG is not available in Brocade Network Advisor.
- The SMI Agent populates this property as “Unknown” in Brocade_EthernetAccessGateway
if the instance is retrieved through enumerateInstances.
- The correct value of this property can obtained through the getInstance() intrinsic
operation only.