Brocade Network Advisor SMI Agent Developer's Guide v11.1.0 (53-1002169-01, May 2011)

28 Brocade Network Advisor SMI Agent Developer’s Guide

53-1002169-01

Fabric profile

LSAN zoning configuration guidelines

The following are the guidelines for configuring LSAN zones:

• The LSAN zone name starts with the prefix “LSAN_”.

• The LSAN zone name is case-sensitive.

• The members must be identified by their port WWN because the port IDs are not unique across

fabrics.

• The names and membership of the same LSAN zone in various fabrics need to be the same

while the order of membership is not necessary.

LSAN zoning in Brocade Network Advisor

The following are the behaviors of Brocade Network Advisor client for LSAN zoning:

• The LSAN zoning device sharing operations are done only through backbone fabrics. This

option is disabled for other edge fabrics.

• The LSAN zone can be added to any managed edge fabrics and backbones during the zone

activation.

• The SMI Agent behavior is same as the client.

Registration

There is no profile registration for this model.

Data model

Figure 12 shows the data model of SAN zoning.