Brocade Web Tools Administrator's Guide (53-0000194-01, November 2006)

Web Tools Administrator’s Guide 3-11
Publication Number: 53-0000194-01
3
Figure 3-4 Configure Tab, Fabric Subtab
To configure fabric parameters
1. Launch the Switch Admin module as described on page 3-3.
2. Disable the switch as described in “Enabling and Disabling a Switch” on page 3-7.
3. Click the Configure tab.
4. Click the Fabric subtab.
5. Make the fabric parameter configuration changes.
6. Click Apply.
7. Enable the switch as described in “Enabling and Disabling a Switch” on page 3-7.