HP StorageWorks SAN Switch Rack Mount Kit Installation Instructions (A7511-90902, May 2007)

12 SAN Switch rack mount kit installation instructions
— For an HP System/e rack, install two #10-32 x 1/2-inch Phillips
pan-head screws with captive star lock washers and two #10
alignment washers in the upper and lower hole locations of the right
rail. Then install two #10-32 x 1/2-inch Phillips pan-head screws with
captive star lock washers and two #10 alignment washers in the
upper and lower hole locations of the left rail, as shown in Figure 5.
Figure 5: Assembling the Outer Rails (HP System/e Rack)