HP StorageWorks SAN Switch Rack Mount Kit Installation Instructions (A7511-90902, May 2007)

4 SAN Switch rack mount kit installation instructions
Related Documentation
For the latest documentation, please visit the following HP website:
http://www.hp.com/go/san
Before You Begin - Important Information about the Plenum
The plenum is an air duct that attaches to the switch rails, enabling the switch to
draw cooler air into the switch from outside the rack, rather than drawing in heated
air from within the rack, see Figure 8.
A plenum ships with the following devices only:
■ SAN Switch 2/8V
■ SAN Switch 2/16
■ SAN Switch 2/16V
■ 4/8 SAN Switch
■ 4/16 SAN Switch
■ 4/32B SAN Switch
See Installing the Plenum (if required), page 17 for complete instructions on
how to install a plenum.