Brocade Secure Fabric OS Administrator's Guide (53-1000244-01, November 2006)

Secure Fabric OS Administrator’s Guide B-1

Publication Number: 53-1000244-01

Appendix

Secure Fabric OS Commands and Secure Mode

Restrictions

Secure Fabric OS commands, zoning commands, and some management server commands must be

entered through the primary FCS switch.

This appendix includes the following information:

• “Secure Fabric OS Commands,” next

• “Command Restrictions in Secure Mode” on page B-6

For more detailed information about commands, see the Fabric OS Command Reference.

Secure Fabric OS Commands

The Secure Fabric OS commands provide the following capabilities:

• Enable and disable secure mode

• Fail over the primary FCS switch

• Create and modify Secure Fabric OS policies

• View all Secure Fabric OS-related information

• Modify passwords

• Create and remove temporary passwords

• View and reset Secure Fabric OS statistics

• View and reset version stamp information

Most Secure Fabric OS commands must be executed on the primary FCS switch when secure mode is

enabled. For a list of restricted commands, see “Command Restrictions in Secure Mode” on page B-6.

Table B-1 lists all the commands available for managing Secure Fabric OS.