Brocade Secure Fabric OS Administrator's Guide (53-1000244-01, November 2006)

Secure Fabric OS Administrator’s Guide B-3
Publication Number: 53-1000244-01
B
secModeShow admin /
fabricAdmin
Displays current mode of Secure Fabric OS.
See “Displaying Status of Secure Mode” on
page 4-4.
Both Any
secNonFCSPasswd admin /
fabricAdmin
Sets non-FCS admin account password. See
“Modifying the Non-FCS Switch Admin
Password” on page 4-10.
Secure mode Primary
FCS switch
secPolicyAbort admin /
fabricAdmin
Aborts all policy changes since changes were
last saved. See “Aborting All Uncommitted
Changes” on page 3-29.
Both Primary
FCS switch
secPolicyActivate admin /
fabricAdmin
Activates all policy changes since this
command was last issued. All activated policy
changes are stored in the active policy set. See
“Activating Changes to Secure Fabric OS
Policies” on page 3-27.
Both Primary
FCS switch
secPolicyAdd admin /
fabricAdmin
Adds members to a policy. See “Adding a
Member to an Existing Policy” on page 3-27.
Both Primary
FCS switch
secPolicyCreate admin /
fabricAdmin
Creates a policy. See “Creating Secure Fabric
OS Policies Other Than the FCS Policy” on
page 3-11.
Both Primary
FCS switch
secPolicyDelete admin /
fabricAdmin
Deletes a policy. See “Deleting a Policy” on
page 3-28.
Both Primary
FCS switch
secPolicyDump admin /
fabricAdmin
Displays the Secure Fabric OS policy database.
See “Viewing the Secure Fabric OS Policy
Database” on page 4-2.
Both Primary or
backup FCS
switch
secPolicyFCSMove admin /
fabricAdmin
Moves an FCS member in the FCS list. See
“Changing the Position of a Switch Within the
FCS Policy” on page 3-9.
Secure mode Primary
FCS switch
secPolicyRemove admin /
fabricAdmin
Removes members from a policy. See
“Removing a Member from a Policy” on
page 3-28.
Both Primary
FCS switch
secPolicySave admin /
fabricAdmin
Saves all policy changes since either
secPolicySave or secPolicyActivate were last
issued. All policy changes that are saved but not
activated are stored in the defined policy set.
See “Saving Changes to Secure Fabric OS
Policies”
on page 3-26.
Both Primary
FCS switch
secPolicyShow admin /
fabricAdmin
Shows members of one or more policies. See
“Displaying Individual Secure Fabric OS
Policies” on page 4-3.
Both Primary or
backup FCS
only
Table B-1 Secure Fabric OS Commands (Continued)
Command Role Description Secure Mode
or Non-
Secure Mode?
Which
Switches
in Secure
Mode?