Brocade Secure Fabric OS Administrator's Guide (53-1000244-01, November 2006)

3-6 Secure Fabric OS Administrator’s Guide

Publication Number: 53-1000244-01

To enable secure mode using --quickmode::

To enable secure mode using --lockdown=scc, --currentpwd, and --fcs options:

The command requests active consent to the terms of the license, requests the identity of the FCS

switches, and requests the new passwords required for secure mode.

switch:admin> secmodeenable --quickmode

Your use of the certificate-based security features of the software

installed on this equipment is subject to the End User License Agreement

provided with the equipment and the Certification Practices Statement,

which you may review at http://www.switchkeyactivation.com/cps. By using

these security features, you are consenting to be bound by the terms of

these documents. If you do not agree to the terms of these documents,

promptly contact the entity from which you obtained this software and do

not use these security features.

Do you agree to these terms? (yes, y, no, n): [no] y

This command requires Switch Certificate, Security license and Zoning license to

be installed on every switch in the fabric.

PLEASE NOTE: On successful completion of this command, login sessions may be

closed and some switches may go through a reboot to form a secure fabric.

Non-FCS admin password will be set the same as FCS admin password.

ARE YOU SURE (yes, y, no, n): [no] y

Please enter current admin account password:

Enabling secure mode, this may take several minutes, please wait...

Secure mode is enabled.

switch:admin>

switch:admin> secmodeenable --lockdown=scc --currentpwd --fcs "*"