Brocade Secure Fabric OS Administrator's Guide (53-1000244-01, November 2006)

3-28 Secure Fabric OS Administrator’s Guide
Publication Number: 53-1000244-01
3
To add two devices to the DCC policy, and to attach domain 3 ports 1 and 3 (WWNs of devices are
11:22:33:44:55:66:77:aa and 11:22:33:44:55:66:77:bb):
Removing a Member from a Policy
If all the members are removed from a policy, that policy becomes closed to all access. The last member
cannot be removed from the FCS_POLICY, because a primary FCS switch must be designated.
To remove a member from a Secure Fabric OS policy
1. From a sectelnet or SSH session, log in to the primary FCS switch as admin.
2. Type secPolicyRemove “policy_name”, “member;...;member.
policy_name is the name of the Secure Fabric OS policy. member is the device or switch to be
removed from the policy, identified by IP address, switch domain ID, device or switch WWN, or
switch name.
3. To implement the change immediately, enter the secPolicyActivate command.
For example, to remove a member that has a WWN of 12:24:45:10:0a:67:00:40 from
MS_POLICY:
Deleting a Policy
If an entire Secure Fabric OS policy is deleted, that aspect of the fabric becomes open to all access.
To delete a Secure Fabric OS policy
1. From a sectelnet or SSH session, log in to the primary FCS switch as admin.
2. Type secPolicyDelete “policy_name.
policy_name is the name of the Secure Fabric OS policy.
3. To implement the change immediately, enter the secPolicyActivate command:
primaryfcs:admin> secpolicyadd "DCC_POLICY_abc",
"11:22:33:44:55:66:77:aa;11:22:33:44:55:66:77:bb;3(1,3)"
primaryfcs:admin> secpolicyremove "MS_POLICY", "12:24:45:10:0a:67:00:40"
Member(s) have been removed from MS_POLICY.
primaryfcs:admin> secpolicydelete "MS_POLICY"
About to delete policy MS_POLICY.
Are you sure (yes, y, no, n):[no] y
MS_POLICY has been deleted.
ote
The FCS_POLICY cannot be deleted.