Brocade Secure Fabric OS Administrator's Guide (53-1000244-01, November 2006)

Secure Fabric OS Administrator’s Guide 3-29

Publication Number: 53-1000244-01

Aborting All Uncommitted Changes

You can use the secPolicyAbort command to abort all Secure Fabric OS policy changes that have not

yet been saved. This function can only be performed from the primary FCS switch.

To abort all unsaved changes

1. From a sectelnet or SSH session, log in to the primary FCS switch as admin.

2. Type the secPolicyAbort command:

All changes since the last time the secPolicySave or secPolicyActivate commands were entered

are aborted.

Aborting a Secure Fabric OS Transaction

You can use the secTransAbort command to abort a single Secure Fabric OS transaction from any

switch in the fabric. This makes it possible to abort a transaction that has become frozen due to a failed

host. If the switch itself fails, the transaction aborts by default. This command cannot be used to abort

an active transaction.

To abort a Secure Fabric OS transaction

1. From a sectelnet or SSH session, log in to the primary FCS switch as admin.

2. Type the secTransAbort command:

Any Secure Fabric OS transaction that was in process is aborted (except for the transaction of

entering this command).

primaryfcs:admin> secpolicyabort

Unsaved data has been aborted.

primaryfcs:admin> sectransabort

Transaction has been aborted.