Brocade Secure Fabric OS Administrator's Guide (53-1000244-01, November 2006)

Secure Fabric OS Administrator’s Guide 4-3

Publication Number: 53-1000244-01

If you do not specify any operands, the command displays all policies in both the active and

defined policy sets.

For example, to display all policies in both active and defined policy sets:

Displaying Individual Secure Fabric OS Policies

Use the secPolicyShow command to display information about one or more specified Secure Fabric OS

policies. This command displays information with pagination.

To display information about a specific Secure Fabric OS policy:

1. From a sectelnet or SSH session, log in to the primary FCS switch as admin.

2. Type secpolicyshow “listtype”, “policy_name”.

listtype is the type of Secure Fabric OS policy set. It can be active, defined, or an asterisk (*), which

displays both versions of the specified policy. policy_name is the name of the Secure Fabric OS

policy. If you do not specify a policy name, the command displays all the policies in the specified

policy set.

If you do not specify any operands, the command displays all policies in both the active and

defined policy sets.

primaryfcs:admin> secpolicydump

____________________________________________________

DEFINED POLICY SET

FCS_POLICY

Pos Primary WWN DId swName

__________________________________________________

1 Yes 10:00:00:60:69:30:15:5c 1 primaryfcs

HTTP_POLICY

IpAddr

__________________________________________________

192.155.52.0

____________________________________________________

ACTIVE POLICY SET

FCS_POLICY

Pos Primary WWN DId swName

__________________________________________________

1 Yes 10:00:00:60:69:30:15:5c 1 primaryfcs

HTTP_POLICY

IpAddr

__________________________________________________

192.155.52.0

192.155.53.1

192.155.54.2

192.155.55.3

____________________________________________________