Brocade Secure Fabric OS Administrator's Guide (53-1000244-01, November 2006)

4-4 Secure Fabric OS Administrator’s Guide

Publication Number: 53-1000244-01

For example, to display all the policies in the defined policy set:

To display the active version of the FCS policy:

Displaying Status of Secure Mode

Use the secModeShow command to determine whether secure mode is enabled.

To determine whether secure mode is enabled:

1. From a sectelnet or SSH session, log in to the primary FCS switch as admin.

2. Type the secModeShow command. The command displays the status of secure mode, the version

number and time stamp, and the list of switches in the FCS policy.

primaryfcs:admin> secpolicyshow "defined"

____________________________________________________

DEFINED POLICY SET

FCS_POLICY

Pos Primary WWN DId swName

__________________________________________________

1 Yes 10:00:00:60:69:30:15:5c 1 primaryfcs

HTTP_POLICY

IpAddr

__________________________________________________

192.155.52.0

192.155.53.1

192.155.54.2

192.155.55.3

192.155.56.4

____________________________________________________

primaryfcs:admin> secpolicyshow "active","FCS_POLICY"

____________________________________________________

ACTIVE POLICY SET

FCS_POLICY

Pos Primary WWN DId swName

__________________________________________________

1 Yes 10:00:00:60:69:30:15:5c 1 primaryfcs

____________________________________________________

switch:admin> secmodeshow

Secure Mode: ENABLED.

Version Stamp: 9182, Wed Mar 13 16:37:01 2001.

POS Primary WWN DId swName.

=============================================

1 Yes 10:00:00:60:69:00:00:5a 21 switch47.

2 No 12:00:00:60:60:03:23:5b 5 switch12.