Brocade Access Gateway Administrator's Guide (53-1000605-01, October 2007)

Access Gateway Administrator’s Guide 25

53-1000605-01

Chapter

Managing Ports in Access Gateway mode

This chapter explains how to use the CLI to manage the ports on Brocade Access Gateway.

NOTE

Refer to the Web Tools Administrator’s Guide for information on setting up Access Gateway using

Web Tools.

In this chapter

•Determining the mapping and port status . . . . . . . . . . . . . . . . . . . . . . . . . . 25

•Configuring port maps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

•Configuring additional F_Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

•Managing policies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Determining the mapping and port status

This section explains how to display the current mapping and port status.

Displaying the port mapping

This section explains how to display the mapped routes of the host connections to the fabric on

Brocade Access Gateway. F_Ports are mapped to N_Ports.

See the Fabric OS Command Reference for more details on using the ag command with the

--mapshow operand.

To display all mappings

1. Connect and log in to the switch.

2. Enter the ag

--mapshow command.