Brocade Access Gateway Administrator's Guide (53-1000605-01, October 2007)

40 Access Gateway Administrator’s Guide
53-1000605-01
Compatibility
B
How to configure McDATA switch
1. Log in as admin on the McDATA switch.
2. Enable MS services on the McDATA switch and enter the following command:
config OpenSysMs setState
3. Enable NPIV functionality on the edge fabric ports so that multiple logins are allowed for each
port. Enter the following command on the McDATA switch to enable NPIV on the specified
ports.
config NPIV
Your McDATA switch is now ready to connect.
How to configure Cisco switch
1. Log in as admin on the Cisco switch.
2. Enter the following commands on the Cisco switch to enable NPIV:
conf t
no fcdomain fcid persistent vsan <vsan#>
fcinterop fcid-allocation flat
vsan database
vsan <vsan#> suspend
no vsan <vsan#> suspend
Hit Ctrl-Z
Your Cisco switch is now ready to connect.