Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)

194 Fabric Manager Administrator’s Guide
53-10000610-02
Work with iSCSI information
14
Modifying an existing port configuration
Right-click a port in the table and click Configure iSCSI Ports in the context menu.
The iSCSI Target Gateway Admin module displays, from which you can view and configure iSCSI
ports (see “Set up iSCSI Target Gateway services” on page 197 for more information on
configuring iSCSI ports).
Viewing details about an existing iSCSI port configuration
Right-click a port in the table and click iSCSI Port Detail View in the context menu.
The iSCSI Port Details window displays, as shown in Figure 126.
FIGURE 126 iSCSI port detail view
iSCSI initiators
The iSCSI Initiator tab, shown in Figure 127, lists all iSCSI initiators in the SAN, fabric, or switch. You
can filter the list based on initiator name (IQN) and initiator IP address.
Viewing additional details about an initiator
Right-click the initiator in the table and click View iSCSI Initiator Details in the context menu.
The Web Tools iSCSI Target Gateway Admin module displays (see “Set up iSCSI Target Gateway
services” on page 197 for more information on how to show more initiator details).