Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)

196 Fabric Manager Administrator’s Guide
53-10000610-02
Work with iSCSI information
14
The Web Tools iSCSI Target Gateway Admin module displays, from which you can view and
configure iSCSI targets (see “Set up iSCSI Target Gateway services” on page 197).
Virtual initiators
The Virtual Initiators tab, shown in Figure 129, lists the virtual initiators available in the SAN, fabric,
or switch. You can filter the list based on virtual initiator name and switch name.
FIGURE 129 iSCSI tab, Virtual Initiators view
iSCSI FC targets
The iSCSI FC Targets tab, shown in Figure 130, lists details of FC targets that are exported as
virtual targets. This tab is disabled when accessed in the switch context.
If the iSCSI target is created by specifying a LUN range from the same FC device, then the table
displays a single entry for the iSCSI target; otherwise, the table displays multiple entries for an
iSCSI target for each LUN shared from FC devices.
Editing the configuration for the iSCSI FC targets
Right-click a device in the table and click Configure Virtual Targets in the context menu.
The iSCSI Target Gateway Admin module, from which you can view and configure virtual targets
(see “Set up iSCSI Target Gateway services” on page 197).