Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)

Fabric Manager Administrator’s Guide 249

53-10000610-02

Security policy settings

FIGURE 161 Configuring the Telnet policy

3. Click Create Policy.

You have now created an empty policy, which denies the policy type (Telnet, RSNMP, WSNMP,

HTTP, or API) access from all hosts to all switches in the fabric.

ATTENTION

If you create policies without Fabric Manager client/server IP addresses,

or...

If you create empty Serial, Telnet, HTTP, and API policies simultaneously,

then...

You will not be able to manage security and the secure fabric.

If you use Fabric Manager to update the API policy to disable API access from the current host

(either by creating an empty policy, or by specifically excluding this host from the API policy list),

the security transaction is locked and can take up to two hours before Fabric OS releases the

security transaction. You cannot modify the policies until the security transaction is released.

If you want to continue managing security and the switch, continue with the rest of the

procedure.

4. Type the IP address of a host that you want to include in the policy in the Enter IP Address field.

NOTE

The IP address of your Fabric Manager client must appear in the Serial, Telnet, RSNMP,

WSNMP, HTTP, and API policies or you cannot access the fabric with Fabric Manager.

5. (Optional) Click Add FM Server IP to add the Fabric Manager server IP address, or click Add this

FM Client IP to add the Fabric Manager client IP address.