Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)

Fabric Manager Administrator’s Guide 253
53-10000610-02
Security policy settings
18
2. Click the tab that corresponds to the policy you want (SES or MS). The selected policy appears
(see Figure 163). The SES policy is used in this example; the MS policy is similar.
FIGURE 163 Configuring the SES policy
3. Click Create Policy.
The WWN of a device that connects to the fabric displays in the Available Access Points list.
4. Select a device from the Available Access Points list.
5. Click Add Device.
6. Click the Summary tab.
7. Click Save to save your changes but not apply them, or click Activate to save and apply your
changes.
The Security Policy Review dialog box displays.
8. After reviewing the Security Policy, click one of the following:
• Continue (to continue applying or to save your changes)
• Cancel (to cancel your changes)
• Copy to File (to copy the Security Policy to a file)
Making changes to your SES or MS policy
1. In the Information panel, right-click the secure fabric for which you want to set policies and
choose Security > Security Policy Editor from the context menu.
The Policy Editor appears (see Figure 158 on page 244).
2. Click the tab that corresponds to the policy you want (SES or MS).