Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)

300 Fabric Manager Administrator’s Guide
53-10000610-02
FCIP tunnel management
21
Disabling FCIP tunnels
1. In the SAN or Fabric view, select the FCIP Tunnel or FCIP Tunnel Link tab.
2. Select the FCIP tunnel to be disabled.
To select multiple tunnels, hold the CTRL key while selecting.
3. Right-click and select Disable FCIP Tunnel, as shown in Figure 198.
FIGURE 198 Enabling and disabling FCIP tunnels
4. Click OK to disable the tunnel or tunnels.
Re-enabling disabled FCIP tunnels
1. In the SAN or Fabric view, select the FCIP Tunnel or FCIP Tunnel Link tab.
2. Select the FCIP tunnel to be re-enabled.
To select multiple tunnels, hold the CTRL key while selecting.
3. Right-click and select Enable FCIP Tunnel.
4. Click OK to re-enable the tunnel or tunnels.
Deleting FCIP tunnels
1. Select the FCIP Tunnel tab.
2. Select the FCIP tunnel to be deleted.
To select multiple tunnels, hold the CTRL key while selecting.
3. Right-click and select Delete FCIP Tunnel as shown in Figure 199.