Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)

Fabric Manager Administrator’s Guide 311
53-10000610-02
Third-party management applications
23
The gping program requires an IP address as an argument. This example uses the IP address
of the principal switch.
6. Click Edit, select %PRINC_SWITCH_IP%, and click OK.
Your Add application dialog box should look similar to Figure 206.
FIGURE 206 Configure gping
7. Click OK.
8. In the Configure Applications for Switch dialog box, click Apply.
9. In the View panel, right-click the switch you just configured and choose Management
Application > Launch > gping.
The Graphical Ping dialog box for that switch appears, as illustrated in Figure 207.
FIGURE 207 gping
Launching Web Tools Switch Explorer
1. In the View panel, right-click the switch from which you want to run Switch Explorer and choose
Management Application > Configure.
The Configure Applications for Switch dialog box appears (Figure 203 on page 308).
2. Click Add.
The Add application dialog box appears (Figure 204 on page 309).
3. In the Application Name field, type WebTools SwitchExplorer.