Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)
Fabric Manager Administrator’s Guide 317
53-10000610-02
Chapter
24
Fabric Manager Reports
In this chapter
•Switch health report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 317
•Fabric summary report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 319
•Physical inventory report. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320
Switch health report
Fabric Manager creates a switch health report that is Web-based. The report displays the switch
state contributors, the status, and the IP address of the switch. Note that this is a static report and
not a dynamic view of the switch. See the Web Tools Administrator’s Guide for additional
information.
The switch health report is available only for switches running the following firmware versions:
• Fabric OS v3.2.x or later
• Fabric OS v4.4.x or later
• Fabric OS v5.0.0 or later
For other switches, either the switch reports option is disabled or an error message is displayed.
Displaying the switch health report
1. Select a switch and click Reports > Switch Health Reports.
You can also right-click a switch and select Switch Health Reports from the context menu.
The Switch Health Report displays, as shown in Figure 212.