Brocade Fabric Manager Administrator's Guide v6.1.0 (53-10000610-02, June 2008)

342 Fabric Manager Administrator’s Guide
53-10000610-02
Merge failure resolution
27
Between secure and nonsecure fabrics
If a fabric merge check between secure and non-secure fabrics fails for zoning or security, use the
information in Table 24.
LongDistanceTest LongDistance mode incompatible:
fabric fabric_1 LongDistance mode: 1
fabric fabric_2 LongDistance mode: 0
Change the long distance mode
value on one fabric or the other so
that the values match
1
InteropMode Test interop Mode incompatible:
fabric fabric_1 interopMode: 0
fabric fabric_2 interopMode: 1
Change the interop mode value on
one fabric or the other so that the
values match
1
DataFieldSizeTest Data field size is incompatible:
fabric fabric_1 dataFieldSize: 1024
fabric fabric_2 dataFieldSize: 2112
Change the data field size value on
one fabric or the other so that the
values match
1
VCEncodingTest VC Encoding incompatible:
fabric fabric_1 vcEncode: null
fabric fabric_2 vcEncode: 1
Change the VC encoding value on
one fabric or the other so that the
values match.
This parameter is available only in
switches running Fabric os 2.x and
3.x.
1
VC Priority Test VC Priority incompatible:
fabric fabric_1: fabric.ops.vc.config: 0xfc
fabric fabric_2: fabric.ops.vc.config: 0xc0
Change the VC priority value on one
fabric or the other so that the values
match
1
PIDTest PID format is incompatible:
fabric_1 pidFormat: 2
fabric_2 pidFormat: 1
Change the PID format value on one
fabric or the other so that the values
match
1
MgmtServerPlatformTest Management Server Platform Enable
incompatible:
fabric_1 ms.PlatEnable: 0
fabric_2 ms.PlatEnable: 1
Use the msplmgmtactivate or
msplmgmtdeactivate command to
change the Management Server
Platform value of the switches
1
1. Replicate Configuration Download can be used to change the configuration for all switches in the fabric.
TABLE 24 Fabric Merge Check between secure and non-secure fabrics
Test Example Corrective action
Zoning Zone check is not possible when either fabric is
a secure fabric
No action required
Security fabric_1 does not have security enabled.
fabric_2 has security enabled sec.mode:1
Enable security for fabric_1 or
disable security for fabric_2
TABLE 23 Fabric merge check between two non-secure fabrics (Continued)
Test Details/Example Corrective action